|
|
楼主 |
发表于 2015-7-17 10:05:01
|
显示全部楼层
[RELEASE] 130
All versions
– Kernel: backport cdc_ether module from Oleg (exclude ARM)
– QOS: Update Default Rules – thx @Toastman and tvlz
– Add libcurl to PHP. Add curl binary to image (AIO only)
– Miniupnpd: update to 1.9 (20150430)
– Alters the behavior of the ‚Create NAT on tunnel’ to also add the appropriate NAT for the other bridges/lans – thx @rriley
– switch4g: completely re-writen
– busybox: update to 1.23.2
– tor: update to 0.2.6.8
K26ARM
– many kernel fixes – thx @edrikk
– fix Layer 7 support – thx @ksanderson
– many GUI fixes – thx @edrikk
– fix long boot issue – thx @nikk gitanes
– OpenSSL: update to 1.0.2a
– mssl updates – thx @RMerlin
– Add Codel support – thx @ksanderson
– Sync Netfilter modules with fixes from Kernel 4.0 – thx @ksanderson
– fix/add QoS inbound support / Add support for IFB instead of IMQ – thx @ksanderson
– add CPU Temperature on Overview Page
– Kernel: upgrade 4G module from kernel 3.18
– Enable TCP Vegas – thx @Josh Allard
– RT-N18U: Use the same image for all Asus`s routers (newer wl driver, add tuxera driver)
– httpd: fix doulbe entries on „Wake On LAN” page
K26/K26RT-N/K26RT-AC
– include all changes from v129
[RELEASE] 129
All versions:
– All images are now compressed to ZIP file.
– OpenVPN: Routing policy integration and GUI
– GUI: OpenVPN – add „Ignore Redirect Gateway (route-nopull)”
– GUI: Bittorrent – allow set download and upload speed to 0
– GUI: Allow users to decide which NTFS driver they want to use: Tuxera (AC56, AC68) or Paragon (N18, Netgears) or NTFS-3G (all routers)
– GUI: Fix OpenVPN TAP server – Server won`t start when TAP has been bridged with br1/2/3 and „Client address pool” has been set manually (not from DHCP)
– Add /mmc directory to „root” tree – required by Tomatoware project
– NTFS-3G driver update to 2015.3.14
– OpenVPN: remove „enable-small” parameter. This is required by some VPN providers.
K26ARM
– GUI: fix Backip and Restore Comfiguration from file
– IPset
* update to 6.24 – attention! This version has different kernel modules and different syntax of command. If you are using IPSet, you have to fix your scripts.
* backport ipset kernel modules from Kernel 3.0
* add library libmnl – required by newer ipset
* fixed support IPSet with Dnsmasq
– add Entware install script for ARM – just run command entware-install.sh
– compile fat/vfat as module
– add Tuxera NTFS driver for AC56/68 routers
– GUI: add Wireless Temperature on Status page – thx Hyzzom (BWQ)
– lot of fixed and improvements in compilation proces – thx @edrikk
– fix TOR compilation
* update to v0.2.5.12
* enable threads support for openssl and tor
* change gcc optimization level from Os to O2 – thx RMerlin
* enable TOR feature in all AIO builds
– Updated Blink Function – thx @chazikai24
– add ASUS RT-AC68P support the same image as for AC68U/R – thx @tvlz
– add Linksys EA6500v2 and EA6700 support – thx @Yongqiang Qin
– fix WS880 leds – thx @xvortex
[RELEASE] 128
All versions:
– include all changes from v125 to Mipsel`s branches
– remove HTTPS from MiniIPv6 build – make it smaller
– OpenSSL: update to 1.0.1m
– Add Nano tool – user-friendly text editor – build-in AIO
– mySQL integration and GUI – thx @Hyzoom (bwq518) – build-in AIO
– bridge-utils update to 1.5
– openvpn: fix crash on NULL cipher – thx @RMerlin
– usb_modeswitch: ver. 2.2.1 with data package 2015-01-15
K26RT-N/AC
– Add new Netgear and Tenda router support -WNDR3400v1/v2, WNDR3700v3, WNDR4000, WNDR4500v1/v2, R6300v1, Tenda N80 – untested – thx @Hyzoom (bwq518)
K26ARM
– fix R6300v2’s vlan
– fix reset button function (push ~5 secs or more to restore default configuration)
– enable reset button for R7000 (R6250/R6300v2) – works only from Tomato, not from CFE
[RELEASE] 127
All versions:
– Bittorrent: Add „Custom Log File Path” to GUI
– IPv6: Allow request /64 subnet for LAN1/2/3 if prefix lenght is lower than 64 – thx @tvlz
K26ARM
– Fix Bandwidth Monitor for ARM – thx @Fab Five Freddy
– ebtables:
* backport ebtables kernel modules from linux-2.6.39.4 sources
* ebtables update to v2.0.10-4
* fix ebtables – now it works on ARM
– iproute2 update to 3.19.0 (from iproute2-ss111010 to iproute2-ss150210)
– bridge-utils update to 1.5
– Disable second *FAKE* LAN interface for Netgear`s routers – thx @tvlz
* Fix ping issue on Netgear`s routers
* Fix Ethernet Ports State on Netgear`s routers
– fix up R7000 WiFi leds
– fix up R6300v2 wlan/wan/usb leds – thx @chazikai24
– fix BW Limiter page – broken in v126
[RELEASE] 126
All versions:
– GUI: Checkox to allow/deny login as „root” to GUI
– BWLimiter: Add Priority option for Default class of br0
– Allow to change username from GUI – partially taken from @Victek`s Github
– ipv6: Other ISP Configuration buton – partially taken from @Victek`s Github
K26ARM
– Netgear R6250 and R6300v2 are now supported (installation process is the same as on R7000 – initial image first) – thx to @qin and @chazikai24
– RAID module and mdadm tool (added to AIO and extras)
– Include NFS server feature to AIO builds
[RELEASE] 125
All versions:
– 4G/LTE modem support and integration with GUI (tested on E3276 and E3372)
– Miniupnpd: update from 1.8 (20140422) to 1.9 (20141209)
– MiniDLNA: update from 1.1.2 to 1.1.4
– OpenSSL: update from 1.0.1j to 1.0.1l
– Grow up limit on IPv4 & IPv6 port forwarding rules creation from 50 to 100 entries.
– webmon_bkp: restart firewall service after clean webmon chain to reload webmon iptables rule
– forward-upnp – allow to run upnpd service without selected any of bridge. Reguired custom configuration!
– tinc: update to 1.1pre11 – thx @lancethepants
– tinc: Update gui and backend for tinc1.1pre11 – thx @lancethepants
– miniupnpd rc: move custom configuration before „allow” statements
– Allowed the IPv6 Forwarding page to allow more fancy subnets & rules – thm @Dupondje
– dnsmasq 2.72+ up to December 9 2014 – thx @toastman
– Enable hash extension in PHP
– RSA 2048 bit keylength, SHA2 public certificate – thx @microalps
– OpenSSL: Removed support for SSLv2 and SSLv3 protocols – thx @microalps
– IPv6: Allow request /64 subnet for LAN1/2/3 if prefix lenght is lower than 64 – thx @tvlz
K26ARM
– remove SNMP and PPTP support for DIR868L – saving nvram space
– Huawei WS880 support – thx @xvortex
– BCM: wl/et drivers update with tools – thx @RMerlin
– Add many kernel modules of audio and camera devices to extras
– fix SNMP compilation / add SNMP to all ARM builds
– Partial support of R6250/R6300v2 – not finished! Info only for devs.
– JFFS – expand size from 32MB to 64MB
– XHCI – Backported XHCI code from Netgear, which seems to be a backport from a newer 3.x Linux kernel – thx @RMerlin
[RELEASE] 124 (refreshed)
All versions:
– Compile v124 for MIPSEL`s routers
– OpenVPN: update to 2.3.6
– PHP: enable exif
K26RT-N
– Compile Mega-VPN instead AIO for E2500v2/E3200
[RELEASE] 124
All versions:
– OpenSSL: update to 1.0.1j
– LZO: update from 2.06 to 2.08
– OpenVPN: update to 2.3.5
– OpenVPN GUI: Selectable LAN interface to bridge with TAP
K26ARM
– Minor multiLAN bugfixes
– MultiSSID: fix web UI errors with dual-radios
– Dlink DIR868L support
– Fix IPTraffic support
[RELEASE] 123 FIX2
K26RT-AC
– fix AC mode (80MHz channel width)
[RELEASE] 123 FIX1
K26 and K26RT-N
– add TINX feature to all AIO builds
[RELEASE] 123
All versions:
– dnscrypt-proxy update: 1.4.1
– libsodium update: 1.0.0
– more advanced Nginx settings in GUI
– add libjpeg, add jpeg support for php
– MiniUpnp – Add „friendly name” – thx @tvlz
– Minidlna – Fixes file streaming for some devices – thx @CBGoodBuddy and @tvlz
– Fix invalid wl_mitigation mode – thx @tvlz
K26ARM
– new sierra and sierra_net module, add sierra_net module to image
– fix optware-install script for ARM
K26-RT-N>
– Linksys E2500v3 suport – thx @tvlz
– make mini/miniipv6 images smaller for Linksys E-series routers – thx @tvlz
K26RT-AC
– support 802.11AC in web settings – once again
All Mipsel`s version
– include all changes from v122
[RELEASE] 122
All version:
– openssl update to 1.0.1i
– libsodium update to 0.7.0
– grow-up „Remote Host /IP” field on admin-log.asp page
– allow to change directory with GUI`s files (only for devs and advanced users)
– tinc: integration and gui. Thx @lancethepants
– nginx: add new option „Run As” (root or nobody)
– add a lot of PHP modules required by ownCloud
– add libpng 1.2.51
– add libxml2 2.9.1
– SQLite update 3.8.6
– libiconv update 1.14
– allow run spawn-fcgi as root
– nginx: fix php support for ownCloud
K26-ARM
– fix display CPU Freq on status page. Detect core numbers.
– disable TOR from ARM builds for now. Got Segmentation fault
– fixed CPU support for RT-N18U
– use different wl, ctf, paragon drivers for RT-N18U (dedicated)
– optware: add Shibby`s packages repository to install script for ARM
[RELEASE] 121
All version:
– add web module for ip6tables (fixed problem with access restriction)
– libcurl update to 7.37
– transmission upgrade to 2.84
K26RT-N and/or K26RT-AC
– fix VLAN order for RT-N66U – thx @tvlz
– fix VLAN/VID mapping
– fix support of Tenda N60 – please read INSTALATION-N60.txt first!
K26-ARM
– fix 3G modem support for ARM
– add RT-N18U suport
– ET driver upgrade – may fix high ping issue
– fix QoS for ARM
– fix Webmon for ARM
– add GRO CONTROL (should stabilize and speed-up dl/ul speed from Samba) – thx RMerlin
[RELEASE] 120
All version:
– openssl update to 1.0.1h
– grow up 6rd-prefix range
– transmission update to 2.83
– dnscrypt: add user selectable/manual proxy input – thx lancethepants
– fix advanced dns/dhcp page
– dnscrypt-proxy update to 1.4.0
– dnsmasq update to 2.71
K26ARM only
– openssl – add options: version, speed and s_client
– add DNSSEC to VPN and AIO builds
[RELEASE] 119
All version:
– DDNS – new services: ovh and changeip
– ovpn client gui: allow to set ip/mask on TAP/TLS
– zlib update to 1.2.8
– Add Web server: php/pcre/nginx/spawn-fcgi – thx Victek – AIO builds only
– openvpn update to 2.3.4
– minidlna – 1.1.2
– miniupnpd – 1.8 (20140422)
– dnsmasq: update to 2.70
– Comcast Fixes: DSCP and buffer overflow with GUI – thx lancethepants
– dropbear: fix some PATH
– DNSSEC with GUI – thx lancethepants – AIO builds only
– dnscrypt: Add dns priority option – thx lancethepants and Victek
– ethstate: fix when we have network aliases of WAN interface
– Access Restriction: return to old „web module” style. „String” module is still in image, advanced users can use it in own iptables rules,
– libsodium: Update to version 0.5.0
ARM only
– new wl driver 6.37.14.86 (r456083)
– kernel update – thx RMerlin
– wl blob update
– add some 3G LTE modules (like cdc) – thx RMerlin
[RELEASE] 117
– Update openssl to version 1.0.1g to fix the problem with heartbleed
* Only RT and RT-N-AC
– Fixed a bug with the number of available guest networks (connection with encryption)
[RELEASE] 116
* K26RT-AC only
– Show correct size of NAND flash in GUI
* K26RT-N only
– Broadcom Wireless update to version 5.110.27.20012
– Bcmcrypto and bcm57xx update (same as in K26RT-AC)
– New router support: Tenda N6 and N60 (not tested but should works, feedback welcome)
* All builds
– Remove SNMP from all builds except AIO and Mega-VPN
– Include Entware install script to all USB builds. (just run command entware-install.sh)
– TomatoAnon: lot of changes:
— update databate only once per week
— check new tomato version once per day (only for shibby mod)
— fix „undefinded” tomato version on Status page
– Miniupnpd: update to 1.8 (20131216)
– Udpxy: update to version 1.0.23-9-prod
– TOR: update to version 0.2.4.20
– Minidlna: update to 1.1.1 (log is now is seperated file /var/log/minidlna.log)
– Libcurl: update to 7.34.0
– Dropbear: update to 2013.62
– Dnscrypt-proxy: update to 1.3.4
– Tools: allow ping/trace to url’s containing hyphens (thx Toastman)
– Dnsmasq: update to v2.69test3 (thx Kevin)
!! Attention: Builds BT-VPN and TOR-VPN are now too big for WNR3500Lv1 and all routers supported by K26RT-N with 8MB flash (like RT-N10U).
[RELEASE] 115
* K26RT-AC only
– Fix weird mac behaviour when openvpn tap is enabled
– Support JFFS for RT-AC66U (limited to 32MB)
– Paragon NTFS driver for Asus RT-N66U and RT-AC66U
* all branches
– Add Openvpn username/password auth – thx rainlake
– Dnsmasq 2.67 final – thx Kevin
– Fix dhcpv4 logging – was always in quiet mode – thx Kevin
– Dnscrypt-proxy: upgrade to 1.3.3
– libsodium: upgrade from 0.4.1 to 0.4.5
[RELEASE] 114
– Compile bcm_nat as module (more info)
– New routers supported – BIG THANKS FOR @tvlz (more info)
– Revert „rp-pppoe: added version 3.11″. Back to version 3.10. This should fix some problems with disconnecting PPPoE WAN.
– dnsmasq: update to Simon version 2.67rc4
– Transmission: update to 2.82
– Release new build for Asus RT-N66U using SDK6 (RT-AC branch). Checkout K26RT-AC directory in download section)
– Update/add new 3G modem modules (more info)
– Add comgt tool and gcom scripts. Add Strength Signal info in syslog
– Fix one bug in ethstate script
– usb_modeswitch: ver. 2.0.1 with data package 2013-08-07
– Access Restriction: delete a rule don’t work using Chrome/Firefox (known) browser.
– Rewised WL driver for RT-AC branch. Version Jul 31 2013 18:46:03 version 6.30.102.9 (r366174)
– Import asuswrt kernel to K26RT-AC branch – for devs info
– Allow coexistance of N build and AC build. Branch tomato-shibby-RT-N will not be continue. Please use RT-AC bracnh- for devs info.
[RELEASE] 112
– WAN DHCP in K24 problem was fixed
– add „string” module for ip6tables
– enable lib optimalization for all builds (make images smaller)
– removed command „version, speed, s_client) from openssl (make images smaller)
[RELEASE] 111
– Some fixes in NETFILTER – thx Victek
– VLAN: Correct ID for RT-N66 allowing VLAN and tagged network – thx Victek
– Add support for newer flash chips in latest RT-N66U hardware revision – thx RMerlin and Victek
– All K26 and K26RT-N builds are compiled using new/fixed toolchain
– ACCESS RESTRICTION: use string module instead web module (https is blocked now – facebook for example)
– pairNIC DDNS service – thx Andy
– Stealthmode and mymotd – some improvements – thx Monter
– Busybox 1.21.1 update
– Add optware-install.h script to Tomato – just mount drive to /opt directory and run „optware-install.sh”. That`a all.
– Transmission: update to 2.81
– RT-AC66u – Enable 5GHz radio (b/g/n max 450Mbps only at the moment)
[RELEASE] 110
– Add „BT” target
– Remove Ebtables from mini builds (make they smaller)
– usb_modeswitch: ver. 1.2.6 with data package 2013-06-07
– Tomato Update Notification System
– miniDLNA update to 1.0.26
– Miniupnpd update to 1.8 (20130521)
– Add codes to support HG320, H218N and RG200E-CA – thx BWQ
– basic-network – add ttyUSB devices to 6
– stealthmode – some improvements
– Change characters limit for snmp fields
– OpenVPN update to 2.3.2
– dnsmasq update to 2.67cs7 – thx Kevin
– many cstats updates – thx RMerlin and Kevin
– a lot of updates and improvements of IPv6 – thx Kevin
– Expose PPPoe variables – thx Kevin
– add netfilter xt_string support
– DNScrypt-proxy: update to 1.3.0
– DNScrypt-proxy: add custom startup option in GUI
– many iptraffic updates – thx RMerlin
– RSA keylength to 1024 for router cert
– Grow-up cookies expire time – thx blackwind
[RELEASE] 109
– Webmon Backup Script – look Administration -> Logging
– Busybox: Fix tune2fs and revert e2label tool
– EtherState: cosmetics changes – looks better
– Ethernet State: fix when WAN is tagged – thx @Victek
– Allow WNR3500Lv2 to upgrade from Web interface
– Openssl: enable s_client
– rp-pppoe: upgrade to 3.11
– Dnsmasq upgrade to 2.67test3 – thx @Kevin
– Added refresh timer to tools/system page – thx @Toastman
– Add Time 0:01 and 23:59 to Scheduler
– Backported new exportfs method (365-exportfs1 patch from WL500g) – thx @RMerlin
– Extended MOTD with GUI – written by @Monter, modified by @Shibby – can be disabled in GUI Administration -> Admin Access -> SSH
– IPTraffic bugfix – thx @RMerlin
– StealthMode v0.5 – Sunset – thx @Monter – please run stealthMode via SSH/telnet for more information
– Fix for dhcpv6 with prefix delegation – thx @Toastman
– Remove radvd & libdaemon, use dnsmasq for IPv6 RA instead – thx @Kevin
– Added ipset support – thx @RMerlin
– Implement multithreaded kernel building to speed up firmware compile time – thx @RMerlin
– Do not write out ‚no-dhcp-interface’ in dnsmasq.conf as is superfluousas no dhcp-range has been set – thx @Kevin
[RELEASE] 108
– Fix vsftpd rights
– Fix upnp GUI
– Miniupnpd: fix permissions to use dotted mask. Return to dotted mask in config file.
– Further optimize lzo compilation to help OpenVPN performance and This optimization gives us a 10% speed gain (thx RMerlin)
– Miniupnpd: add custom configuration textarea to GUI
– Fix reboot/logout/shutdown buttons from nas-ups page.
– Make some images smaller
– Add ebtables to all mini K26 builds.
– HTTPS remote access should now works on builds without VPN included (libssl problem)
– Fix default vlans for RG200E-CA
[RELEASE] 107
– Preliminary ChinaNet RG200E-CA support (RT-N branch, only for routers with changed CFE)
– StealthMode v0.3 (fixed turn on/off leds on RT-N16, add „leds guardian” to cru) (thx Monter)
– Gives another nice performance boost, for less than 100KB tradeoff after LZMA compression ( thx RMerlin)
– Ntfs-3g release 2013.1.13
– Increase TC_HTB_NUMPRIO to 10 (thx Toastman)
– Improvement in the appearance of the qos-classify ( thx Monter)
– Preliminary FiberHome HG320 ID/support (RT-N branch)
– Preliminary Catchtech CW-5358U ID/support ( RT-N branch)
– Add new miniVPN buildtype for router with 4MB flash
– Dnsmasq: update to 2.66TEST16 ( thx Kevin)
– Make remote HTTPS more secure ( use RSA 2048 key, use router name as CN)
– Miniupnpd: fix SIGUSR2 problem
* fix showing opened ports in GUI
* lanmask has to be present as bits
– Transmission: update to 2.77
– Busybox: revert dhcpc from BB 1.18.4 for now
* Works release/renew
* Remaining Lease Time is showing correct
– TTB: we need unzip tool
– Fix for excessive VPN logging „vpn server already running”
– 3G Modem: fix switch3g script
– Ethernet State: cosmetics changes
[RELEASE] 106
– Busybox: full update to 1.20.2
– Miniupnpd: update to 1.8 (20130207)
– Stealthmode scripts for RT-N16 and RT-N66u only. Usage: /usr/sbin/stealthMode on|off
– Grow up static dhcp entries from 140 to 250
– Libevent: update to 2.0.21
– robocfg update for new Ethernet ports state feature
– Ethernet State Report with GUI
– Fix OpenVPN depends in K24 builds
Note:
– Robocfg is not perfect and it`s not fully support all routers with Tomato. On some gigabits routers, 1Gbit connections can be displayed as 10M. It`s a robocfg fault. You can disable speed info from GUI.
– if ethernet ports are displayed in wrong order, you can enable „invert ports order” options.
– if some of you don`t like Ethernet ports state, you can disable this feature in GUI.
[RELEASE] 105
– Add TC-ATM overhead calculation for DSL – thx Tvlz
– Revised QOS classification rules – thx Toastman
– new L7 filter pattern for youtube – – thx Porter
– Switchable QOS Pie Chart – thx Dinnn
– OpenSSL update to 1.0.1c and:
* enable OpenSSL assembler acceleration
* enable 2 new openssl commands: version and speed
– OpenVPN update to 2.3.0 (ipv6 support)
– LZO update to 2.0.6
– Transmission: update to 2.76
– Re-enable TCP Vegas settings
– Add IMQ based QOS ingress, incoming bandwidth pie chart – thx Tiomo
– Column sorting fixes – thx Tony550
– Add previous WAN IP to status overview – thx Victek
– Correcting grammar errors – Big thanks for GhaladReam
– Fix VLAN mapping ports for RT-N10U
– Make some build smaller
– TomatoAnon: generate a random clock (minutes) for interval update.
– TTB: project integration and GUI
– Fix long boot time on Asus RT-N16
– xl2tpd: update to 1.3.1 + patches. Fix L2TP connections. Tested on Beeline-Russia by user @DollaR
– Allow to redirect remote access ports (SSH & HTTP(s) ) to router if DMZ is enabled. Checkout new option in forward-dmz page.
– TOR: update to 2.3.25
[RELEASE] 104
– Revised/recompiled BCM driver K26RT-N backported from Asus GPL 3.0.0.4.220
– Support 2nd radio (5GHz) using wl_high module for router Asus RT-N53, Linksys E2500 and E3200
– VLAN mapping for Asus RT-N53
– include TomatoAnon project (disabled by default)
– revert (fully integrade tomato-RT branch with my branch (lot of teddy`s updates from april to august 2011) and add only some of commits like
* rc: fix for E4200 mac address
* BCM SDK: dirty dd-wrt fix for Belkin f7d4302 5GHz radio
* USB: LED driver: support multiple devices
* Build: fpkg: fix creating Belkin images
[RELEASE] 102
– Add fully support for 3G modem ZTE MF195 (ttyACM0 device)
– Transmission: update to 2.71
– Remove limitation about 22 bits netmask
– SD card support only for RT-N66u (save space)
– Add support for Asus WL-330gE
– Add support for Huawei E3131s-2 (module and usb_modeswitch data only)
– Remove some extra themes from TOR-VPN builds (save space, image was too big for Netgear 3500L v1)
– Compile/include mdadm tool only if RAID is set (save space)
– Fix a bug in the Asus/Linksys Red Themes
– NTFS-3G update fo 2012.1.15
– fully integrade tomato-RT branch with my branch (lot of teddy`s updates from april to august 2011
[RELEASE] 101
– IPv6 suppord fixed (sit.ko module depends)
– Transmission fixed (libiconv depends issue)
– RAID 0/1 support. Modules and mdadm tool available in extras. Mega-VPN and AIO have RAID modules and tool build-in
– radvd update to 1.9.1 + libdaemon
– Memory leak fixed (when IPv6 is enabled)
– L2TP WAN connection fixed
– VLAN mapping for Belkin routers
– miniDLNA update to 1.0.25
– AsusRed and LinksysRed themes bu @Nitro 2nd edition
– Linksys E2500 Power LED fixed
– Images for Belkin routers (K26)
[RELEASE] 100
– Fix dnscrypt-proxy
– Fix GPT support for hard disks
– IPv6: Proof-of-Concept 6RD support
– Move all IPSec modules to extras/ipsec/ directory
– Two new themes by Nitro
[RELEASE] 099
– Fix virtual wireless (MultiSSID)
– Transmission: update to 2.61
– IPP2P: update to 0.99.16
– DNScrypt-proxy: update to 1.0
– DDNS: fix HE.net Tunnel Broker messages
– Add directory /tftpboot to root tree
– Add e2label (TUNE2FS) tool to USBEXTRAS
– Added IPSec support. All needed modules you can find in extras package. Builds Mega-VPN and AIO have build-in all needed modules. Please use strongswan from entware!
– Increase countdown after reboot router
– Add ZTE MF195 3G modem support (ZTE MF192 variant x T-Mobile/EE UK)
– TOR: Grow up data dir field
[RELEASE] 097
– Add PPTP VPN client runtime and GUI
– Fix OpenVPN settings page when using username authentication
– Fix overidden mac address not being saved.
– Add configuration options for the WAN ICMP Rate limiting
– Total/Free NVRAM on overview page
– TOR: Integration and GUI
– New „Max” builtype for router with 8MB flash and w/o USB support
– Driver for CH341 USB-serial adapter available in extras
– Transmission: update to 2.60
– Add support for RT-N66 (ONLY) 64K nvram (Upgrading from a 32K nvram firmware will wipeout all your data.)
[RELEASE] 095
– fix working PS3 with minidlna
– fix [bwlimit] link on overview-devices page
– fix „ug” bug with running shell scripts on RT-N66u
– remove garbage from Router Name
– enable USB Support by default
– enable SD Card support for RT-N66u by default
– samba security fix – „root” credential remote code execution
– wl_mitigation disabled by default
– VLAN:
experimental VLAN/VID mapping GUI (allows creating VLANs with 802.1Q tags larger than 15 via GUI)
allow DMZ-style forwarding to alternative LAN bridges
– PPTP:
allow specify ‚custom’ config/settings
dnsmasq to answer DNS queries on pppX interfaces
– MultiSSID: some minor fixes
[RELEASE] 093
– Busybox:
add WHOIS tool
fix ash repetear bug
– Dropbear: 2012.55 update
– Dnsmasq: 2.61 update
– Captive Portal: lot of fixes and improvements
new style of splash.html
selectable interface (br0/1/2/3)
fixed PATH in shell files (Thx for @baranek from openlinksys.info)
some of patched from dd-wrt
add to autostart
– Add SNMP configuration options for custom port and remote access
– Remove „CPU % usage” on Status Overview page
– Transmission: update 2.52
– New theme for „Dark Knight” RT-N66U ( by Dark_Shadow)
– Fix menu highlights (Captive Portal and BW Limiter)
– lot of changes in buildtypes (some removed, add new)
RT-N builds only:
– WL 5.100.138.20 SDK: wl binaries, et/bcm57xx drivers, dnsmq module
– Asus RT-N10U: fix USB led
– Asus RT-N15U: fix USB led
– Support Asus RT-N53 (no 5GHz support, 2,4GHz only)
– WNR3500Lv2 – Fixed display Free NVRAM on Admin->Configuration page (thx @krisan)
– Add new Linksys E-series routers support (thx @tvlz)
[RELEASE] 092
– Fix GUI broken in 090 in build without VPN
– Fix PPTP when used over WAN setup using PPPoE
– Transmission: lot of changes in compilation process:
update to 2.51
remove gettext from depends
add libiconv + patches from openwrt
revert transmission-remote tool as optional (TR_EXTRAS). Included in Mega-VPN and AIO builds
add EVENT_NOEPOLL=1 to startup script
result = very stable transmsision and very fast GUI
– BW Limiter: few fixes:
fix default class for br3
fix default classes (br1\br2\br3) when default class br0 is enabled
– curl update from 7.21.1 to 7.25.0
– libevent update from 2.0.11 to 2.0.18
– OpenSSL update from 1.0.0d to 1.0.1-stable including all teddy`s patches/changes
– 3G Modem: Add ttyUSB1 and ttyUSB3 to modem device list
[RELEASE] 090
– added MultiSSID
– added PPTP server
– change blocklist update function to not using transmission-remote nomore
– remove transmission-remote will save lot of space
– remote TR_EXTRAS (transmission-create)
– OpenVPN update to 2.2.2
– BW Limiter: default classes for each LAN (br1/2/3)
[RELEASE] 088
– dnscrypt-proxy integration with GUI (basic -> network)
– UDPxy integration with GUI by Teaman (advanced -> firewall)
– qos-graphs fixed
– status-overview fixed (works autorefresh and show buttons)
– increase max of bwlimit entries from 40 to 80
– removed user-define imq settings (advanced -> firewall)
– don`t disable USB 3G box when storage checkbox is not checked
– ups monitor service inprovements
– two new buildtypes (BT and Mega without VPN)
– remove CIFS and JFFS from BT-VPN
– was too big for 8MB routers
– Mega-VPN is now only for router with more than 8MB flash
– add UPS feature to AIO
[RELEASE] 087
– fix usb_modeswitch (libusb error). 3G support will works now
– USB Speed improved. Old schema detection enabled
– miniDLNA update from 1.0.22 to 1.0.24
– little cosmetics changes in Overview page. Able to show/hide each section
– IP Traffic: when/if set to ‚disabled’, we ‚really’ mean it
– fix VLAN support for WNR3500Lv2 and remove JFFS support for this router
– remove JFFS and SNMP from BT-VPN build. Image was to big for routers with 8MB flash memory
– propably this is the last release of K24
[RELEASE] 085
– ip6tables fixed
– „account” and „lan access” error
– fix Toggle Visibility on QoS pages
– fix syslog service when custom path is enabled
– WOL should now works on br1,2,3
– cosmetics changes in status-overview about LAN section
– Transmission update from 2.42 to 2.50
[RELEASE] 084
– few changes in compilation of transmission (should be more stable)
– added ratio option 0.0
– Add ZTE MF192 3G modem support
– fix MARK module
– Additional options to syslog (local file)
– route modem IP for „Static” WAN
Attention: Propably build Mega-VPN will be too big for netgear 3500L
[RELEASE] 083
– IPTraffic:
fix column sorting on ipt-daily.asp, ipt-monthly.asp and ipt-details.asp
option to show hostnames and/or IPs on IPTraffic graphics
conn/BW ratios graphs
– Added CPU % usage to Status Overview page
– Added „Route Modem IP” option (basic -> network). This option allow access to adsl modem in bridge mode
– Ovislink 1600GL: Turn on/off „Connected” led when WAN connection is up/down
– VLAN-GUI: include E4200 and WHR-G54S port mapping |
|
|Archiver|手机版|小黑屋|第一站论坛
( 蜀ICP备06004864号-6 )
窥视卡
雷达卡
发表于 2015-2-26 11:48:23
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
千斤顶
显身卡